Skip to content
Fire door automation

LOG-FPRS230

230 V AC drive with a 24 V brake.

LOG-FPRS230 is the single-phase 230 V drive with a 24 V brake for fire roller shutters, in 600 kg and 800 kg versions. The data sheet lists motor supply and brake voltage separately, making it easier to check the control panel interface.

Request information

Tell us about your project and we will advise you on the most suitable solution.

LOG-FPRS230

The shutter fabricator checks load and lifting height against the torque and load data. The rating is S2 duty with an operating time of 7 min.

Technical specifications
Technical specifications LOG-FPRS230
Supply230 V AC at 50 Hz
Phases1
Brake24 V
Maximum door load (600 kg version)600 kg
Input power (600 kg version)836 W
Rated current (600 kg version)3.9 A
Output shaft torque (600 kg version)412 N·m
Output speed (600 kg version)4.8 r/min
Maximum door load (800 kg version)800 kg
Input power (800 kg version)920 W
Rated current (800 kg version)4.7 A
Output shaft torque (800 kg version)647 N·m
Output speed (800 kg version)4.0 r/min
Lifting height7 m
Operating time7 min
DutyS2
Insulation classB
Ingress protection ratingIP40
Operating temperature−15 to +45 °C

Source: product data sheet.

The solution

Single-phase drive for fire shutters

The installer uses the panel schematic to check the supply, brake and proposed operating sequence.

Applications and settings
  • Fire roller shutters. Select the drive against shutter weight and height.
  • Panels with brake control. Review supply and the brake interface.
  • Shutter integration. Coordinate the drive with the intended sequence.
Frequently asked questions

LOG-FPRS230

What maximum load does it take?

There are two 230 V versions: one for doors up to 600 kg and one up to 800 kg, each with its own torque and power.

What voltage does the brake require?

The data sheet specifies a 24 V brake.

What lifting height is listed?

The stated lifting height is 7 m.

What duty rating is listed?

S2 duty with an operating time of 7 min.

What do you check at the control panel?

The motor supply, brake interface and shutter sequence.

What information do you need to assess my project?

Send the shutter type, weight, height, travel, supply and panel schematic.

Need to automate something complex?

Tell us what needs to move, how much it weighs and where it goes. We will study it with you.

Tell us about your project